Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this situation, you will need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

If you plan to try to remove the glass panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap between the door and the window is significant, you may want to use security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs near me repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal than the frame. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a simple procedure, but it is easier to do when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to provide suggestions.

It is also important to grease the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your upvc window repair windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges, also because of wear and tear, could become misaligned. This will cause gaps to develop between the sash and the frame. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also be misaligned, and again it may be possible to give them a good clean, but in some cases it might be necessary to get them replaced.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window repair near me with low-emissivity glass, this will help in regulating indoor temperatures and will reduce draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes filled with some type of filler. They can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to recognise that all windows have a life span and they may reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your upvc window repair near me window it is recommended to speak with a professional immediately.