Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you're planning to try to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may think about a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a number of problems such as sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the size of the window, tighten the screws to keep them in place.

If you aren't able to move the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. Often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. You'll first need to close the window and do an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is easier when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window repairs in a particular way or due to inadequate installation at the factory. This issue can be fixed by sending us a picture on our website. We will be pleased to offer you advice.

It is also essential to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window repairs near me easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also become misaligned due to wear, creating a gap between the frame and sash. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can be unbalanced. It is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace them.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.