Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors repairs is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. If you have double glazed window repair-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap between the door and the window is large, you might want to use an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to open the windows to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue the caulking that was used up may require removal before a new layer is applied. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will only make your double glazing window repairs harder to clean and lower its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double glazed window repair-glazed glass, it is more likely that the issue is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze it could be the hinges that are at the fault. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Like all mechanical parts, hinges can wear out over time. Changing a window hinge is an easy process, but it's simpler with someone else to help you hold the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge, this shows which way the window should open.

Faulty window hinges could be caused by improperly opening the window a certain way or by inadequate installation at the factory. Sending us a picture through our website can often solve the issue. We are more than happy to give suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be disaligned as a result of wear, causing a gap where the sash and frame meet. If they are damaged beyond repair, it might be required to realign them. The interlock may also become unbalanced. This happens on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be put on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.